Conservationist®

Conservationist® Power Direct Vent

Conservationist® Power Direct Vent

The Conservationist® BPD-75 tank-type commercial gas water heater is intended for applications such as small office buildings and duplex apartment homes. The BPD-75 features a power direct vent design with a factory-installed blower. The blower permits sealed combustion direct vent operation with separate venting and air intake runs from outside the structure. The BPD-75 offers installation versatility by allowing venting and intake runs up to 50 feet, using 3˝ Schedule 40 PVC pipe.

View Products
Conservationist® Power Vent

Conservationist® Power Vent

Conservationist® Power Vent has a solid state ignition surface that does not flutter or blow out. Provides increased reliability and efficiency over spark ignition systems. Eliminates the pilot and saves energy. Air is precisely drawn through the combustion control port and exhausted through plastic pipe. Controlling the airflow through the heater enhances and regulates the combustion process. In standby mode, the combustion control port restricts air circulation through the heater.

View Products
Conservationist® Induced Draft Low NOx

Conservationist® Induced Draft Low NOx

Conservationist® BTN models are equipped with a blower that produces a power-induced draft of make-up air prior to burner ignition.

View Products
Conservationist® Ultra-Low NOx BLN

Conservationist® Ultra-Low NOx BLN

The BLN-80 commercial gas water heaters meet California Air Quality Management District Requirements for NOx emissions of less than 14 ng/j.

View Products
Conservationist® BT

Conservationist® BT

Conservationist® BT models provide reliable, efficient service for applications such as office buildings and duplex/fourplex apartment homes.

View Products
Conservationist® Ultra-Low NOx BL

Conservationist® Ultra-Low NOx BL

Conservationist® Ultra-Low NOx BL-100 model is an atmospheric vent commercial gas water heater with NOx emissions of less than 14 ng/j and meets the thermal efficiency and standby loss requirements of the U. S. Department of Energy and Current Edition ASHRA/IESNA90.1.

View Products
Conservationist® Large Volume Powered Burner

Conservationist® Large Volume Powered Burner

Conservationist® large volume powered burner water heaters are perfect for large industrial, commercial and institutional applications. This rugged line features up to 2.5 million BTU input and 600 gallons storage. Each model features a PermaGlas® glass-lined tank and multiple anodic protection to prevent tank corrosion.

View Products
Conservationist® Small Volume Powered Burner

Conservationist® Small Volume Powered Burner

Conservationist® small volume powered burner water heaters are ideal for mid-sized commercial applications, with inputs up to 740,000 BTUs. They provide outstanding 80% thermal efficiency, thanks to a sealed combustion chamber that reduces heat loss. Other innovations include fully automatic controls and an inspection port for flame monitoring during operation.

View Products